Posts for tag: dental implants
Implant-supported fixed bridges are growing in popularity because they offer superior support to traditional bridges or dentures. They can also improve bone health thanks to the affinity between bone cells and the implants' titanium posts.
Even so, you'll still need to stay alert to the threat of periodontal (gum) disease. This bacterial infection usually triggered by dental plaque could ultimately infect the underlying bone and cause it to deteriorate. As a result the implants could loosen and cause you to lose your bridgework.
To avoid this you'll need to be as diligent with removing plaque from around your implants as you would with natural teeth. The best means for doing this is to floss around each implant post between the bridgework and the natural gums.
This type of flossing is quite different than with natural teeth where you work the floss in between each tooth. With your bridgework you'll need to thread the floss between it and the gums with the help of a floss threader, a small handheld device with a loop on one end and a stiff flat edge on the other.
To use it you'll first pull off about 18" of dental floss and thread it through the loop. You'll then gently work the sharper end between the gums and bridge from the cheek side toward the tongue. Once through to the tongue side, you'll hold one end of the floss and pull the floss threader away with the other until the floss is now underneath the bridge.
You'll then loop each end of the floss around your fingers on each hand and work the floss up and down the sides of the nearest tooth or implant. You'll then release one hand from the floss and pull the floss out from beneath the bridge. Rethread it in the threader and move to the next section of the bridge and clean those implants.
You can also use other methods like specialized floss with stiffened ends for threading, an oral irrigator (or "water flosser") that emits a pressurized spray of water to loosen plaque, or an interproximal brush that can reach into narrow spaces. If you choose an interproximal brush, however, be sure it's not made with metal wire, which can scratch the implant and create microscopic crevices for plaque.
Use the method you and your dentist think best to keep your implants plaque-free. Doing so will help reduce your risk of a gum infection that could endanger your implant-supported bridgework.
If you would like more information on implant-supported bridges, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”
Everyone has to face the music at some time — even John Lydon, former lead singer of The Sex Pistols, arguably England’s best known punk rock band. The 59-year old musician was once better known by his stage name, Johnny Rotten — a brash reference to the visibly degraded state of his teeth. But in the decades since his band broke up, Lydon’s lifelong deficiency in dental hygiene had begun to cause him serious problems.
In recent years, Lydon has had several dental surgeries — including one to resolve two serious abscesses in his mouth, which left him with stitches in his gums and a temporary speech impediment. Photos show that he also had missing teeth, which, sources say, he opted to replace with dental implants.
For Lydon (and many others in the same situation) that’s likely to be an excellent choice. Dental implants are the gold standard for tooth replacement today, for some very good reasons. The most natural-looking of all tooth replacements, implants also have a higher success rate than any other method: over 95 percent. They can be used to replace one tooth, several teeth, or an entire arch (top or bottom row) of teeth. And with only routine care, they can last for the rest of your life.
Like natural teeth, dental implants get support from the bone in your jaw. The implant itself — a screw-like titanium post — is inserted into the jaw in a minor surgical operation. The lifelike, visible part of the tooth — the crown — is attached to the implant by a sturdy connector called an abutment. In time, the titanium metal of the implant actually becomes fused with the living bone tissue. This not only provides a solid anchorage for the prosthetic, but it also prevents bone loss at the site of the missing tooth — which is something neither bridgework nor dentures can do.
It’s true that implants may have a higher initial cost than other tooth replacement methods; in the long run, however, they may prove more economical. Over time, the cost of repeated dental treatments and periodic replacement of shorter-lived tooth restorations (not to mention lost time and discomfort) can easily exceed the expense of implants.
That’s a lesson John Lydon has learned. “A lot of ill health came from neglecting my teeth,” he told a newspaper reporter. “I felt sick all the time, and I decided to do something about it… I’ve had all kinds of abscesses, jaw surgery. It costs money and is very painful. So Johnny says: ‘Get your brush!’”
We couldn’t agree more. But if brushing isn’t enough, it may be time to consider dental implants. If you would like more information about dental implants, please call our office to schedule a consultation. You can read more in the Dear Doctor magazine articles “Dental Implants” and “Save a Tooth or Get an Implant?”
In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?
“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.
How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.
With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.
In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.
While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.
Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”
Let’s say you’re traveling to Italy to surprise your girlfriend, who is competing in an alpine ski race… and when you lower the scarf that’s covering your face, you reveal to the assembled paparazzi that one of your front teeth is missing. What will you do about this dental dilemma?
Sound far-fetched? It recently happened to one of the most recognized figures in sports — Tiger Woods. There’s still some uncertainty about exactly how this tooth was taken out: Was it a collision with a cameraman, as Woods’ agent reported… or did Woods already have some problems with the tooth, as others have speculated? We still don’t know for sure, but the big question is: What happens next?
Fortunately, contemporary dentistry offers several good solutions for the problem of missing teeth. Which one is best? It depends on each individual’s particular situation.
Let’s say that the visible part of the tooth (the crown) has been damaged by a dental trauma (such as a collision or a blow to the face), but the tooth still has healthy roots. In this case, it’s often possible to keep the roots and replace the tooth above the gum line with a crown restoration (also called a cap). Crowns are generally made to order in a dental lab, and are placed on a prepared tooth in a procedure that requires two office visits: one to prepare the tooth for restoration and to make a model of the mouth and the second to place the custom-manufactured crown and complete the restoration. However, in some cases, crowns can be made on special machinery right in the dental office, and placed during the same visit.
But what happens if the root isn’t viable — for example, if the tooth is deeply fractured, or completely knocked out and unable to be successfully re-implanted?
In that case, a dental implant is probably the best option for tooth replacement. An implant consists of a screw-like post of titanium metal that is inserted into the jawbone during a minor surgical procedure. Titanium has a unique property: It can fuse with living bone tissue, allowing it to act as a secure anchor for the replacement tooth system. The crown of the implant is similar to the one mentioned above, except that it’s made to attach to the titanium implant instead of the natural tooth.
Dental implants look, function and “feel” just like natural teeth — and with proper care, they can last a lifetime. Although they may be initially expensive, their quality and longevity makes them a good value over the long term. A less-costly alternative is traditional bridgework — but this method requires some dental work on the adjacent, healthy teeth; plus, it isn’t expected to last as long as an implant, and it may make the teeth more prone to problems down the road.
What will the acclaimed golfer do? No doubt Tiger’s dentist will help him make the right tooth-replacement decision.
If you have a gap in your grin — whatever the cause — contact us or schedule an appointment for a consultation, and find out which tooth-replacement system is right for you. You can learn more in the Dear Doctor magazine articles “Dental Implant Surgery” and “Crowns & Bridgework.”
Dental implants are popular with both patients and dentists for their durability and likeness to natural teeth. That natural look, though, can be difficult to attain, especially in what’s known as the “smile zone” — the area of the mouth where teeth are most visible when you smile.
Our biggest concern is the upper front teeth, where the gums are most visible, especially if you smile widely. It takes considerable skill, experience and artistry to position implants in this area so that they appear to naturally emerge from the gums and blend well with other teeth.
To obtain that natural look, we must first assess whether or not there’s enough bone present, which tends to dissolve (resorb) when a tooth is missing, to sufficiently anchor the implant in the right position. There also needs to be sufficient bone around adjacent teeth to support the tiny triangles of gum tissue between teeth called papillae. Without the papillae an unattractive black hole may result between the implant and an adjacent tooth or implant.
Another factor we must consider is the type of gum tissue you have. Everyone generally inherits one of two types of tissue from their parents: thin or thick. The type you have can influence the way the implant appears to emerge from the gums. If you have thick gums, they’re easier to work with and can cover more of the implant. Thinner tissues aren’t quite as easy and are less forgiving if an implant isn’t placed as precisely as possible.
In recent years, improvements in implant design have sought to provide greater stability around bone and gum tissues to offset some of the issues we’ve mentioned. A variation on the design of the top of the implant (where the crown is attached) changes the direction of growth for gum tissues from a horizontal orientation to a vertical one, which can help with the final appearance.
The first step, if you’re considering dental implants for a tooth in the smile zone, is to visit us for a complete examination to see if any of these factors may have an impact on your situation. We can then advise you on the best course of action to achieve the most attractive smile possible.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Implant Aesthetics.”